The George Washington University
School of Engineering and Applied Science
Department of Electrical and Computer Engineering

ECE 2115 - ENGINEERING ELECTRONICS - Spring 2015

Tutorials, Labs, Projects & Spec Sheet Page

---

The experiments will be posted here 1 week before each lab, along with any tutorials needed to complete the pre-laboratory work.  The pre-laboratory work is within the experiment document itself, you are expected to download and complete the prelab prior to attending lab.

---

TUTORIALS:

Tutorial #	Tutorial Description
Tutorial 1	DC Sweep Analysis in Multisim
Tutorial 2	Simulating Transformers in Multisim
Tutorial 3	Parametric Sweep Simulation of a BJT
Tutorial 4	Bias Point Analysis in Multisim
Tutorial 5	Designing a Common-Emitter Amplifier
Tutorial 6	Designing a Common-Collector Amplifier
Tutorial 7	Designing a Cascaded Multistage Amplifier

---

LABS:

Click HERE for the required format for all laboratory reports

Lab #	Lab Name
Lab 0	Introduction to the ECE 2115 Lab
Lab 1	Experiment #1: Solid State Diodes – Testing & Characterization
Lab 2	Experiment #2: Solid State Diodes – Applications I
Lab 3	Experiment #3: Solid State Diodes – Applications II
Lab 4	Experiment #4: Solid State Diodes – Applications III
Midterm Project	Midterm Project: DC Power Supply
Lab 5	Experiment #5: Characterization of an NPN Bipolar Junction Transistor (BJT)
Lab 6	Experiment #6: Biasing an NPN BJT - Introduction to CE, CC, and CB Amplifiers
Lab 7	Experiment #7: Designing and Measuring a Common-Emitter Amplifier
Lab 8	Experiment #8: Designing and Measuring a Common-Collector Amplifier
Lab 9	Experiment #9: Designing and Measuring a Cascaded Multistage Amplifier
Lab 10	Experiment #10: Final Project Preparation
Final Project	See project section below
	Optional Labs (at GTA's discretion)
Lab 10 (pdf)	MOSFET: Transistor Characterization
Lab 11 (pdf)	MOSFET: Biasing & Amplifier Into
Lab 12 (pdf)	MOSFET: CD Amplifier - Digital Logic Into
Lab 13 (pdf)	CMOS: Digital Logic

---

PROJECTS:

Project Name	Description
Midterm Project	Midterm Project: DC Power Supply
Final Project	iPod Docking Station

---

SPECIFICATION SHEETS AND SPICE MODELS:

Lab Equipment (more equipment manuals posted HERE):

Equipment Model #	Description
Agilent E3631A	DC Power Supply
Keithley 175	Digital Multimeter

Parts:

Data Sheet	SPICE MODELS	Description
1N34A		Diode: Germanium Based
1N4002		Diode: Silicon Based
1N751A		Diode: Zener Type
MV5753		Diode: LED - GaAsP
166K18		Transformer: 115VRMS:18VRMS
KC004N-ND		Thermistor (Thermal Resistor)
LM7805CT		+5V Silicon Voltage Regulator
2N3904		NPN BJT Transistor
TIP31A	pwrbjt.olb pwrbjt.lib	NPN BJT Power Transistor
2N7000	fairchild.olb fairchild.lib	N-Channel MOSFET Transistor

*** Disclaimer: The spec sheets posted may not match the parts in your kit, they change from year to year.  It is up to you to verify that they match the parts supplied in your kit before relying on them.  These are posted here as a courtesy.