Gate Delay, Power, MUX

Part (A):

For each module in your midterm project design:

-Calculate the average gate delay.

-Calculate the average power dissipation.

Based on these results, calculate:

-Calculate the gate delay for each operation.

-Maximum gate delay for all operations and show that your design works at 30 MHz.

-Calculate the average power dissipation over all operations assuming that the likelihood of each operation is equal.

Part (B):

Design, test and layout an 8 to 1 MUX employing pass-transistor logic and the technology files employed in your midterm project.Make sure that you test the circuit when the control input switches at 30 MHz.